Difference between revisions of "VPN"

Latest revision as of 12:59, 28 October 2021

Redirect to:

swhdocs:sysadm/user-management/openvpn/openvpn.html

@@ Line 1: / Line 1: @@
-The [[Software Heritage]] server and the VMs running on it are severely firewalled.
+#REDIRECT [[swhdocs:sysadm/user-management/openvpn/openvpn.html]]
-To get onto their network unrestricted, a VPN based on [https://openvpn.net/ OpenVPN] is available.
-The setup is client-server, with per-client certificates.
-== OpenVPN client configuration ==
-=== Raw OpenVPN ===
-Sample configuration file, e.g., /etc/openvpn/swh.conf:
-<pre>
-remote vpn.softwareheritage.org
-ns-cert-type server
-comp-lzo
-nobind
-dev tun
-proto udp
-port 1194
-log /var/log/openvpn.log
-up-restart
-persist-key
-persist-tun
-client
-ca /etc/openvpn/keys/softwareheritage-ca.crt
-cert /etc/openvpn/keys/softwareheritage.crt
-key /etc/openvpn/keys/softwareheritage.key
-user nobody
-group nogroup
-# If you are using resolvconf, add this:
-# Make sure you add louvre to /etc/hosts to avoid issues in using the vpn-provided DNS server.
-script-security 2
-up /etc/openvpn/update-resolv-conf
-down /etc/openvpn/update-resolv-conf
-# If you want the connection to persist when your network fails, add this:
-ping-restart 10
-</pre>
-In addition to the above configuration file, you will need to install the following 3 files under /etc/openvpn/keys (matching the paths within the sample above):
-* '''[[softwareheritage-ca.crt]]''': ''public'' certificate for the Software Heritage certification authority (CA)
-* '''[https://wiki.softwareheritage.org/index.php?title=VPN#For_admins softwareheritage.crt]''': ''public'', client-specific (certificate signed by the admin, see below)
-* '''[https://wiki.softwareheritage.org/wiki/VPN#For_users softwareheritage.key]''': ''private'', client-specific key (generated by the user, see below)
-Activate the openvpn server
-as root, run
-   systemctl enable openvpn@swh.service
-   systemctl start openvpn@swh.service
-   systemctl status openvpn@swh.service
-Note: Internally, the `swh` must match the /etc/openvpn/swh.conf filename.
-Excerpt of a successful start:
-  root@machine:~# systemctl status openvpn@swh.service
-  openvpn@swh.service - OpenVPN connection to swh
-   Loaded: loaded (/lib/systemd/system/openvpn@.service; indirect; vendor preset: enabled)
-   Active: active (running) since Thu 2020-12-17 19:03:29 IST; 22min ago
-     Docs: man:openvpn(8)
-           https://community.openvpn.net/openvpn/wiki/Openvpn24ManPage
-           https://community.openvpn.net/openvpn/wiki/HOWTO
- Main PID: 12302 (openvpn)
-   Status: "Initialization Sequence Completed"
-    Tasks: 1 (limit: 4915)
-   CGroup: /system.slice/system-openvpn.slice/openvpn@swh.service
-           └─12302 /usr/sbin/openvpn --daemon ovpn-swh --status /run/openvpn/swh.status 10 --cd /etc/openvpn --script-security 2 --config /etc/openvpn/swh.conf --writepid /run/openvpn/swh.pid
-Dec 17 19:03:29 machine systemd[1]: Starting OpenVPN connection to swh...
-Dec 17 19:03:29 machine systemd[1]: Started OpenVPN connection to swh.
-=== Network Manager GUI ===
-You need network-manager-openvpn and network-manager-openvpn-gnome for the configuration gui.
-[[File:nm_openvpn_base.png]]
-[[File:nm_openvpn_routes.png]]
-[[File:nm_openvpn_advanced_general.png]]
-[[File:nm_openvpn_advanced_security.png]]
-[[File:nm_openvpn_advanced_tls_auth.png]]
-== Obtaining a client certificate ==
-=== For users ===
-Generate a keypair (key + certificate signing request) using the following command:
-<pre>
-openssl req -new -newkey rsa:2048 -nodes -keyout openvpn.key -out openvpn.csr -subj "/CN=<your username>"
-</pre>
-Please replace <your username> with something that uniquely identifies the certificate.
-Make sure openvpn.key is stored in a safe place (it's your private key, which will allow anyone to connect to the VPN).
-Provide the CSR file to a sysadmin through a reasonably authenticated medium.
-=== For admins ===
-* On the firewall (192.168.50.1), go to the [https://192.168.50.1/system_certmanager.php System / Trust / Certificates page]
-* click on the add button on the upper right
-[[File:Vpn-main-trust-page.png]]
-* On the Method list, choose "Sign a certificate Signing Request"
-[[File:Vpn-csr-signing.png]]
-Fetch the CSR file provided by the user, for instance with <tt>scp USERNAME.csr louvre:</tt>
-* Enter the user name on the descriptive name
-* Select "OpenVPN Software Heritage (louvre)" as Certificate Authority
-* Enter the duration, usually 10 years
-* Paste the csr
-* Validate
-* check the details of the csr and validate
-== Revoking a client certificate ==
-On the firewall (master) [https://192.168.50.1]:
-* go to the [[https://192.168.50.1/system_crlmanager.php System / Trust / Revocation]] page
-* edit the "OpenVPN certificate revocation list" CRL
-[[File:Vpn-crl-list.png]]
-* go to the bottom of the page
-[[File:Vpn-csr-certificate.png]]
-* select the certificate to revoke
-* Add
-The counter of revoked certificate should be increased by one on for the OpenVPN CSR on the CSR list
-[[Category:Infrastructure]]
-[[Category:System administration]]

Difference between revisions of "VPN"

Latest revision as of 12:59, 28 October 2021

Navigation menu

Search